Picture of Dynatronix Pulse Power Supply
Current status:
AVAILABLE
Book | Log
Show/Collapse all

1st Responsible:
2nd Responsible:
You must be logged in to view files.

The MicroStar DuPR Series power supply is based on linear technology. The control interface features a fully-programmable microprocessor. Menus are accessible to set ampere time and real-time cycles, output tolerance requirements and more.

System Output: DC, Pulse, Pulse Reverse

  • 0.0 - 10.0 volts average (DC) or peak (pulsed) voltage
  • 0 - 0.1 amps average current (or maximum DC current)
  • 0 - 0.3 amps peak (pulsed) current

Set point resolution: (forward & reverse)

  • 0.0 - 10.0 volts in 0.1 volt increments
  • 0.0 - 002.9 milliamps (peak) in 0.1 milliamp increments
  • 03.0 – 300.0 milliamps (peak) in 0.1 milliamp increments
  • Minimum suggested setting: 1% of peak rating

Meter resolution: (forward, reverse, or effective)

  • 0.0 - 10.0 volts in 0.1 volt increments
  • 0.0 - 002.9 milliamps (average) in 0.1 milliamp increments
  • 01.0 – 100.0 milliamps (average) in 0.1 milliamp increments
  • Includes RS485 serial port for host control
  • Meter readings below 10 volts will show 0.01 volt resolution
Tool name:
Dynatronix Pulse Power Supply
Area/room:
Y-MST
Category:
Metrology
Manufacturer:
Dynatronix
Model:
DuPR10-.1-.3XR
Tool rate:
A

Instructors

Licensed Users

You must be logged in to view tool modes.